HC Equipment routine maintenance, inspection items and inspection cycle
2020-04-20HC Equipment routine maintenance, inspection items and inspection cycle Check item Inspection cycle See Details >
SMT PRINTER STENCIL BLOCKAGE
2020-04-20When theSMT PRINTERmachine is printed, there will sometimes be a problem that the stencil is blocked, which greatly affects the work efficiency, and the solder paste cannot be printed normally. What causes the solder paste to block the stencil? HC solderSee Details >
How to Select Solder Paste for SMT Printer
2020-04-20SMT printing process selection of solder paste is a very complex process, if not paid more attention, it will probably cause waste of components.
Usually,the evaluation of the advantages and disadvantages of a solder paste and process performance is based on its printability, mountability,See Details >
Matters needing attention in adjusting parameters of SMT red
2020-04-20Matters needing attention in adjusting parameters of SMT red glue printing press(1) Pressure is about 4.5 kg.(2) The best way to roll red gum on the stencil is to add red gum about 300g.(3) The middle distance of SNAP OFF is set to 0.05 mm and the speed iSee Details >
Marry Christmas to Everyone
2019-12-24It is said that Jesus was conceived by the Holy Spirit and born of the Virgin Mary. God even sent messenger Gabriel to tell Joseph in a dream, asking him not to marry Mary because she was unmarried, but to marry her, and to name the child "Jesus"See Details >
2019 Munich international electronic production equipment exhibition
2019-12-04Electronic production equipment exhibition in Munich Productronica is from Munich, Germany exhibition company, in the 2019-11-12-2019-11-15, the exhibition next two years, the exhibition is open the Germany market an important platform, electronic productSee Details >
2019 Shenzhen Nepcon Asia_HC AUTOAMTION
2019-09-02On August 28th, 2019, the Asian Electronics Production Equipment and Electronics Industry Exhibition was held at the Shenzhen Convention and Exhibition Center.See Details >
What is SMT solder paste printing machine?
2019-08-06What is SMT solder paste printing machine? It is mainly divided into Manual solder paste printing machine: The operation is simple, the printing speed is fast, the structure is simple, the defects are less controllable points of the printingSee Details >
Nitrogen reflow soldering and SMT solder paste printing machine
2019-07-23Nitrogen reflow is done by filling the reflow oven with nitrogen to prevent oxidation of the components in the reflow oven to prevent oxidation of the components in the reflow soldering. The use of nitrogen reflow is mainly to enhance the quality of the wSee Details >
HC AUTOMATION SMT PRINTER
2019-07-11Operation Process and Requirements of SMT Automatic Printer for Shenzhen HC Automation EquipmentSee Details >
Productronica China exhibition
2019-03-27In March in Shanghai, the sky is at the end of the tall building, and the stream of people is roaming the streets. The three-day Productronica China exhibition in Munich ended in full swing. HC AUTOMATION, with its rich equipment display, superb solutionsSee Details >
NEPCON CHINA 2018 The 28th China international electronic production equipment and microelectronics industry exhibition was successfully held in Shanghai world expo on April 24 and 26.
2018-05-08NEPCON CHINA 2018
The 28th China international electronic production equipment and microelectronics industry exhibition was successfully held in Shanghai world expo on April 24 and 26.See Details >
Home / News
